How To Fly A Box Kite
Box kite is known for its lifting ability. In fact, most of the kite altitude records are held by large box kites. You can make this box kite with materials that are easy to find from your hardware or craft store. The lightweight material will help it fly, even in a light breeze.Reading: how to fly a kite box
WHAT DO YOU NEED TO MAKE A KITE BOX?
- Pocketknife
- Pencil
- Scissors
- Smooth tooth saw
- 4 wooden pegs 1⁄4” x 36”
- 4 wooden pegs 1⁄4” x 17”
- 4 suction cups can slide on 1⁄4” pin
- Household chain
- Carpenter’s glue
- Conduit or masking tape
- Lightweight construction paper (You can also use 2 mil painter’s canvas, newspaper, wrapping paper, or a plastic trash bag.) You’ll need two 11″ x 64″ sheets of material.
- Kite string
WHAT WILL YOU DO TO MAKE A KITE BOX?
1. Cut to the length of the 1⁄4” dowel. Use your pocket knife to carve a notch at each end of the 17″ dowel. The notches on opposite ends of each dowel should be at the same angle to fit the pin they will cross.
Read more: how to get recently added playlists on apple music2. Mark each 17″ pin along its length at 8 1⁄2″. Turn the notches in the right direction and fasten the ends together at the halfway point with household wire. Soak the wire with glue. After the glue dries, wrap the joints tightly with masking tape or masking tape. Make two of these crosses, they will hold the frame together.
3. Cut eight 4” lengths of straws. Cut and fold each straw as shown. Slide the straws into each 36″ pin. Use tape to hold the straws in place, 6″ from the tip of each pin. Make sure that both suction cups on each pin are facing the same direction. Slide the crosses into the straw. Use tape to hold the whole thing together while you fasten the joints together with string, glue and tape as in Step 2. This will form a very strong frame for your kite. As an option, you can wrap a rope around each end of the frame for extra strength.
4. Tape and wrap the 11” x 64” sheet material tightly around the frame. Cut to length and tape in place.Read more: how to find bluetooth version on Android
5. Stick the tape around the panels on all sides.
6. Attach the kite string as shown, and you are ready to fly.
PHOTOS OF THE COMPLETED PROJECTS
Check out the photos of this finished project sent to us by Boys’ Life readers. If you have a picture of your BL Workshop project, please use the form below to send it to us. Read more: how long does the refrigerator last?
Last, Wallx.net sent you details about the topic “How To Fly A Box Kite❤️️”.Hope with useful information that the article “How To Fly A Box Kite” It will help readers to be more interested in “How To Fly A Box Kite [ ❤️️❤️️ ]”.
Posts “How To Fly A Box Kite” posted by on 2021-10-27 12:39:06. Thank you for reading the article at wallx.net
