How To Hang Deer Antlers On Wall

You can purchase planks, hangers, and twine to attach your deer stand from your sorter, many local sporting goods stores, or from major sporting goods catalog retailers. You can even custom build your own whiteboard if you have the skills.

How to attach your own gauze

Contents

If your antlers fit the wall, but aren’t large enough for the sorter, consider this easy DIY deer antler project.

Essential tools for attaching your deer antlers

A drill, wire brush, Borax, Clorox bleach, drill bit, glue gun and glue, scissors, drywall screws, a hammer, and some other supplies and finishes.

Step 1: Get Started

A hacksaw or hacksaw will do the trick. Brad Herndon: This diagram shows how to see a deer skull disc to make a standard skull mount. A hacksaw or hacksaw will do the trick.

Step 2: Dry the skull

Clean the flesh from the deer’s skull. Outdoors LifeBorax is a drying agent and helps clean meat from deer skulls.

Step 3: Crush the skull disc

Use a wire brush on a bench grinder. Outdoor Life An iron brush on a desktop grinder helps to clean deer skulls.

Step 4: Switch to Smaller Brush

The wire brush works well on the small crevices of deer skulls. Outdoor Life An iron brush works well on the small crevices of a deer’s skull.

Step 5: Remove the dried blood

Clean dry blood on gauze. Outdoor life The small, fine iron brush is also great for cleaning dry blood stains on gauze.

Step 6: Drill holes in the skull

Three holes are required. Outdoor LifeDrill holes in skull for plaque attachment. Three holes are required.

Step 7: Attach the skull

Hold the skull tight. Outdoor living Read more: how to stay warm in bed at night On a standard skull mount, secure the skull to the mounting plate with three drywall screws.

Step 8: Cover the skull

Smash the brass in from the bottom, working side to side as the cover material is attached to a standard skull holder.

Step 9: Add string marks

Glue gun works fine. Editor Outdoor Life Online Secure the twine around the velvet edge with glue. Glue gun works fine.

Step 10: Protect Hanging Tabs

A flat stand can also be used. Outdoor Life Editor Online Fasteners secure the sling to the mounting plate. A flat stand can also be used.

Step 11: Attach the velvet

This coating is rubber, very easy to use. Editor Outdoor Life Online This section shows what a finished standard skull stand looks like. You can also use velvet or leather to wrap the skull. This coating is rubber, very easy to use.

Step 12: Two different mounting styles

Don’t let bleach get on the gauze. Outdoor LifeShown are two styles of finished velvet hangers that you can make yourself; standard skull mount and European mount. The European bracket is attached with drywell screws from the back of the board. Also, on European mounts you will need to boil the skull in Clorox bleach until it is clean and white. Don’t let bleach get on the gauze. – Brad Herndon

A new take on Euro Mount: 3 kits to display deer skulls

Sitting against the wall of my office is a pile of antlers from the dollars I’ve killed over the years. It’s a solid collection, ranging in size from 135 to about 155 inches. Although I want to get all the shoulder-mounted stuff done, I also want to pay the rent for the next few months. have to find room for all those bulky racks. Here are alternatives to the standard shoulder mount.

Do-All Iron Buck

This fun kit allows you to take a set of antlers that have been cut out of a skull. Nick Ferrari This awesome kit ($40) lets you take a set of antlers that have been cut from a skull and attach them to a steel-looking skull. Read more: how to make sure your rv water heater is full Insert the skull plate between the two plates and tighten with screws. Accomplished. I scratched the finish a bit during assembly, but that may be more a function of my groping fingers than a design flaw. panels to complete the look. Do-All provides discs, but you can also make your own easily.

The Skull Hooker

Skull Hooker is designed to display a standard Euro skull holder. Nick Ferrari Despite the silly name, this is a pretty solid product. The Skull Hooker is designed to display a standard Euro skull holder, using an ingenious hook system threaded into the spinal nerve opening at the back of the skull. You can easily adjust the angle of the stand to tilt the skull to the desired position. I am very satisfied with this result. The Hooker comes in two finishes and two sizes: the Little Hooker ($35) is suitable for a deer-sized creature, while the Big Hooker ($60) can support an elk-sized game. There is also a countertop model.

Mountain Mike Skull Master

The Skull Master set gives you the option of attaching a full skull without the trouble of handling a real skull. Nick FerrariOne of the biggest problems I have with skulls is cleaning the skull. I tried everything, from boiling and scraping to burying and letting the bugs do the work. Both are smelly and tedious processes. The Skull Master set gives you the option of attaching a full skull without the trouble of handling a real skull. And if you have a warehouse set, this is a great way to display them. This kit includes a plastic skull, two different sized bases, and mounting hardware. This process is quite easy. You drill holes into the base of each velvet edge and then screw them into the correct sized skull head. This kit sells for around $35, depending on variants. -Tony Hansen Read more: how to write a miscarriage letter