How To Make A Simple Walking Robot At Home
In this simple project I will show you how to make a homemade Walking Robot with very minimal components. This walking robot does not require an Arduino or a Raspberry Pi. All you need is a 5V geared motor, batteries and a few ice cream sticks.
Introduce
Contents
During my time at the Electronics Center, I implemented many types of robots such as hand gesture control robot, obstacle avoider robot, track robot, robotic arm, remote control robot distance etc Read: how to make simple walking robot at home have few things in common like Microcontroller (Arduino UNO in most cases), Motor driver (L293D or L298N), few motors , chassis, etc. But the robot I’m about to build doesn’t require all the fancy electronics or programming. .
The idea behind DIY walking robot
The idea behind this DIY Walking Robot is that you don’t need an expensive robot frame or the aforementioned electronics to build a working robot. A simple mechanical structure with a small rotating part (like an engine) is enough to successfully build a robot.
Crafting a Walking Robot
Motor and battery The important part of this robot is the motor. I used a 5V 150 rpm geared motor. To power this I used a small Li-po battery. You could use a switch in series with the battery and motor but I connected them directly. Make sure the motor has a double-sided shaft, the small white piece of plastic where you normally connect the wheels.Also, I’ve fixed the battery on the back of the motor’s plastic case so it stays steady without wobbling. after the specified shapes and sizes. Read more: learn how to be a time agent






Make the Robot Walk
After confirming all joints are properly glued, you can start the engine to test the Robot. In case you use the switch, turn on the switch and the motor starts spinning. Due to the mechanical structure of the robot, the rotation of the motor shaft turns into the forward and backward movement of the robot legs. in the rear and the rotating motor causes them to change positions alternately, and a walking motion is simulated.
Inference
A simple DIY Walking Robot with no Arduino or motor driver is designed and built in this project. This can be a fun project for kids who are interested in robots, and since it doesn’t involve any electronics and programming, they can easily build them. Read more: In The Shield Wall | Top Q&A
Last, Wallx.net sent you details about the topic “How To Make A Simple Walking Robot At Home❤️️”.Hope with useful information that the article “How To Make A Simple Walking Robot At Home” It will help readers to be more interested in “How To Make A Simple Walking Robot At Home [ ❤️️❤️️ ]”.
Posts “How To Make A Simple Walking Robot At Home” posted by on 2021-10-22 22:03:09. Thank you for reading the article at wallx.net






