How To Make Suction Cups Stick To Tiles

You just bought a new handheld shower and it comes with a holder that has a suction cup on the back. It looks very convenient on the outside, but it likely won’t stick to the wall. How do you get a suction cup stuck to the tile wall in the bathroom? Read: how to make suction cups stick to tilesIn order for the suction cup to stick to the wall without damage, make sure the cup and wall are completely clean and free of dirt. Apply some mineral oil to the wall to enhance suction power. Now press the suction cup against the wall with as much force as possible. Hold the pressure for about 15 to 30 seconds.Bathroom accessories with suction cups are a godsend for those who don’t want to drill holes in their beautiful bathroom tiles. Drilling holes in the tile runs the risk of damaging the tile and ruining the aesthetic of the bathroom. If you learn how to glue them properly, you will know that suction cups are a great alternative to screws and bolts. However, there are many obstacles to the suction cup’s grip and hold power.

Best surface for suction cup

It may come as a surprise, but your bathroom tile is the best surface for suction cups. These cups adhere best to smooth surfaces, and commonly used glossy bathroom tiles are also glossy. They often have a rough surface, so they won’t hold the cup for long. For the suction cup to work properly, there must be a vacuum between the cup and the wall. It is because of that vacuum that the cup is sticky. Uneven or bumpy surfaces leave gaps for air to come in and out, without a vacuum there is no suction and without suction the cup won’t stick. Suction cup to brick.

Step 1 – Choose the right point

Contact with water, especially hot water, will cause the suction cup to come off much faster. That’s why it’s best to choose a location that’s out of the shower’s reach. Usually, the handle of the shower is high enough to avoid the nozzle because it is narrower at the top, but you need to find a safer location for other accessories such as suction cups, soap dispensers, for example.

Step 2 – Clean the surface and cup

No matter how smooth, dirty tile is not a good surface to provide suction. The wall in the bathroom didn’t seem too dirty, but it had traces of soap and scum. So the first step is to scrub the tile with household cleaner and rinse until it’s clean. Just don’t scrub too hard and leave a scratch. You also need to clean the suction cup as well.Read more: how to make a shark tooth necklace Make sure both the surface and the cup are dry before proceeding to the next step. Let dry in the air or use a microfiber cloth. Other clothing may leave small fibers behind.

Step 3 – Enhance suction

There are several things you can do to ensure stronger suction. The method we recommend is to apply a little mineral oil to the surface before sticking the cup. It is just enough to form an almost invisible layer on the tile. For uneven surfaces, the trick is to apply a piece of masking tape to the wall prior to application. Just make sure there are no bubbles between the tape and the brick.

Step 4 – Make it Sticky

Place the suction cup in the position you want and apply strong pressure for at least 15 seconds. Make sure the pressure is even on the cup so the cup doesn’t move or slide. Leave the sticky cup there for at least 24 hours before placing any weight or exposing the cup to water.

Extra tip: Make your cup suckers last longer

Over time, some air can get inside the vacuum and the handle will loosen. ‘Ợ’ cup to remove air by pressing it for a few seconds. You should burp it now and then to keep it tight and secure.Another way to ensure a stronger grip is to use silicone sealant or adhesive instead of mineral oil. The silicone seals are like magic and will keep the bond airtight for years. You’d be surprised by how much they can endure if stuck appropriately.

Inference

Follow the correct method and you can get a suction cup to stick to the tiles like magic. Remember, it’s important to start with a clean surface and a clean cup. Good luck! Read more: how to set separate wallpapers on dual monitors

Last, Wallx.net sent you details about the topic “How To Make Suction Cups Stick To Tiles❤️️”.Hope with useful information that the article “How To Make Suction Cups Stick To Tiles” It will help readers to be more interested in “How To Make Suction Cups Stick To Tiles [ ❤️️❤️️ ]”.

Posts “How To Make Suction Cups Stick To Tiles” posted by on 2021-10-29 17:37:26. Thank you for reading the article at wallx.net