How To Make A Tube Top

Today I will show you a really easy method how to make a pipe head with stretch fabric. All you need is some stretch fabric and a little bit of elastic and you’re good to go. This top can be smoothed or slightly creased in the front for fun. Tube tops are a must-have during the summer months and are great for layering underneath skirts and turtlenecks.

How to make pipe ends – Supplies

Contents

  • CLOTH – This tube top model uses stretch fabric. It is important that the fabric has a stretch factor of at least 25-50% because there are no zippers or openings. It’s elastic at the top and goes over your head so it needs to be stretched. Choose a light to medium weight fabric. If you’re on a budget, why not consider recycling. You can make a tube top from an old t-shirt. Read about knitted fabrics.
  • EYES – ¼ inch (6mm) elastic to the top. You want your tube tip to stay on! Hold the elastic under your armpit comfortably and cut it ½ inch longer for overlap. The elastic will keep your tube pattern in place, so it should be stretched a little, not too tight. Knitted spandex is best because it’s strong and won’t stretch as you sew through it. Do not use braided elastic. Read about types of elastic.
  • DEMAND – Stretch fabric must be sewn with a stretch needle to avoid missing stitches. Choose a scissor needle that’s the right weight for your fabric.
  • GENERAL GARMENT SUPPLY – Sewing machine, thread, staple

How to create a top TuBe template

Take measurements

You will need a few sewing measurements to create your tube top pattern.

  • The top of the bust – Measure about an inch or less from your armpit. This is where you will wear the tube shirt pattern.
  • Belt – Measure your waist at the smallest part.
  • Hip – You don’t need to measure your hips if you are making a crop top.
  • Longs – Measure the overall length you want. This can end up at your waist or hips. When measuring, start just below your armpit (about an inch lower) and measure down. On average, this will be 8 inches for a crop top and 16 inches for a top that ends at the hips.
    • See Also  How to make tiger sauce

    Prototyping the tip of the tube

    Now that you have all your measurements, it’s time to create a template. Take a sheet of paper that is roughly half the size of your body. Glue multiple printer pages together or use a roll of brown paper or newspaper. You don’t need fancy patterning paper to make patterns.

  • BUST – Start you drawing a line with ¼ of your bust. (If your bust is 40 inches, this line will be 10 inches.)
  • BELT – Measure 8 inches (20cm) down and draw another line ¼ of your bust. (If your waistline is 32 inches, this line will be 8 inches.)
  • HIP – Measure 8 inches (20 cm) down and draw a third straight line ¼ of your hips. (If your hips are 44 inches, this line would be 11 inches.)
  • LONGS – Adjust the length according to your preference. The pattern below shows a top ending at the hip. Depending on your overall length preference, you may want it shorter or longer than the hip line you drew. For a crop top, you can finish the pattern at the waistline. For the top that ends between the waist and hips, you can simply add 4 inches to the waist length.
  • LINK – Join the lines using a gentle curve to form your side seam.
  • SAUTHORIZATION OF EAM – Add seam allowance. Add ⅜ inch (1cm) to the sides and top and ¾ inch (2cm) to the bottom hem.
  • MIRROR – Trace the other side of your pattern like a mirror image.
  • SIGN – Draw a straight grain and mark its name and cut 2.

    • How to make a tube tip pattern

    Cut

    Now it’s time to cut your pattern out of your stretch fabric. Cut 2 pieces – one front and one back.

    • Make sure the fabric is flat on the table and not wrinkled.
    • Use sharp scissors so as not to burr the edges.
    • Before you start cutting, check that the pin leaves a hole in the fabric. If yes then use sample weights instead. Cans from your pantry make cheap and effective sample weights.
    See Also  How To Take Apart A Gun

    How to make a pipe head - CutHow to make a pipe head – Cut

    How to make a tube top from a t-shirt

    Making a tube top out of a t-shirt is easy. Choose a t-shirt that is slightly loose on your body and place your pattern as shown below. The model will fit starting from under the arm. Cut through both layers and you will have your front and back piece of fabric. Sewing instructions are the same as if you cut the pattern from a flat piece of fabric. Recycling is great! It is cheap and reduces backfill.how to make a 9 . pipe tip

    How to make a pipe head – Sewing instructions

    Step 1 – Side seams

    Read more: how to remove pop up ads on samsung s9 plus Glue the front and back of the right sides together and sew the side seams with a seam that allows ⅜ inch (1cm). If you don’t have cutlery, use a narrow zig-zag stitch on your regular machine with an extended needle. Try a width of 1.0 and a length of 3.0.How to make a pipe end - Sew side seamsHow to Sew a Pipe End – Sewing Side Seams The reason why a straight seam won’t work is that the seams need a little stretch so they don’t break as you move around. Zig-zag will stretch to your body and be much more durable, because the stretch fabric doesn’t fray so you don’t need to finish the seams. Read more about sewing stretch fabric if you’re new to this.IMPORTANCE – Turn the end of the tube to the right side and try it in. Stretch fabrics vary in their stretch, so you may find it a little looser than you would like. Snap side seams if necessary. Don’t forget we will add elastic to the top.How to make a pipe end - Sew side seamsHow to make a pipe end – Sew side seams

    Step 2 – Stretching

    Stack the ends of the elastic by ½ inch and sew together to form a circle. Read more: Resize images with PixlrMark stretch circles to quarters. Fold the end of the tube in half and mark the front and back centers. The side faces are the other quarter marks, matching the elastic quarter marks with the pipe end quarter marks on the wrong side. The stretch seam is best placed on the side or back. Sew the elastic to the top edge using a wide zig-zag stitch. Try a seam of 5.0 width and 2.0 length. Fold the elastic inward and zig-zag again.How to sew one end of the tube - Sew the top elasticHow to sew one end of the tube – Sew the top elasticHow to make a pipe end - StretchHow to make a pipe end – Stretch

    See Also  How To Get A Squishy Supplier

    Step 3 – Hem

    To create a border, flip the raw edge up ¾ inch (4cm) and zig-zag over it. For really stretchy fabrics, edging tape will prevent wrinkling. Read how to knit fabric.How to make a pipe head - HemHow to make a pipe head – Hem

    Step 4 – Finishing

    Your shirt is finished and ready to wear. Consider adding appliques or ruching for decoration.How to make a pipe endHow to make a pipe endHow to make a pipe endHow to make a pipe end

    How to make a top model – In conclusion

    So now that you know how to make a tube top, you can make one in any color. This is really a quick and easy clothing project for all floors and a great way to enhance a t-shirt. Read more: how to ask a woman to sleep with you

    More free clothing samples

    • Collected skirt patternDress collection
    • Simple dressSimple dress
    • How to make a fleece scarfFleece towels
    • how to make infinity scarfEndless scarves
    • How to make an infinity scarf
    • How to make a hood
    • How to make a fleece scarf
    • Simple Skirt Tutorial
    • Collected skirt pattern

    Last, Wallx.net sent you details about the topic “How To Make A Tube Top❤️️”.Hope with useful information that the article “How To Make A Tube Top” It will help readers to be more interested in “How To Make A Tube Top [ ❤️️❤️️ ]”.

    Posts “How To Make A Tube Top” posted by on 2021-10-26 17:23:12. Thank you for reading the article at wallx.net

    Rate this post
    Back to top button