How To Paint A Cooler

Video How to paint a coolerPaint coolers are a great way to add character to your trips to the beach, pool parties, designer, fraternity traditions or other outdoor gatherings. The ingredients are easy to find and the method is also quite simple. All you need is a cooler, some paint and your imagination.Each side of your cooler may be different!

Material:

• Any size cooler (new or used)
• Gesso
• Acrylic paint (I used: Melon, Royal Fuchsia, Naphthol Red, Marigold, Cadmium Yellow, Festive Green, Sea Aqua, Turquoise Blue, Ocean Blue, Primary Blue, Snow White
• Paintbrushes (I used: Deco Color Fine Line in black and white, and Sharpie Medium Point in red and blue)
• Ice painter
• Mod Podge Outdoor
• 2 ” paint brush (or similar larger size)
• Detailed brushes (extra small, small and medium)
• Sponge brush (2” and one dauber 1”)
• tissue model
• Transfer paper

First step: Paint Cooler with Gesso

First, wash and dry the entire indoor unit. Once dry, apply the first coat of gesso over the entire surface. Let the first layer dry and apply 1-2 more layers until you have even coverage and the original color of the cooler is no longer visible. Gesso gives you a blank canvas to create your painted cooler and allows the paint to really pop and look brighter.Cover at least 2 layers of gesso in the fridge. Let dry between coats of paint.

Step 2: Sketch on the cooler

Gather your more amazing painting ideas and inspiration by looking through magazines, searching online, or using your own photos. First, sketch a design on a separate sheet of paper or you can draw it straight onto the cooler. Use a pencil to lightly sketch your design onto the cooler.

Step two: Paint the background color

Read more: How to record the screen on iphone 12 pro max Paste the sides with tape. Draw your design piece by piece. For the wave, I painted the colors from lightest to darkest: Ocean, Turquoise, and Primary Blue. The sun and rays are Naphthol Red and the sky is Marigold. You may have to apply 2-3 coats of each color, as some colors are translucent (like Naphthol Red and Primary Blue) and your outline marks will show through the first layer. Draw each part of your design one by one.

Step 3: Add details

Once dry, paint the details with a detail brush or paint them with a paintbrush. (Be sure to do this part outdoors or in a well-ventilated area when using DecoColor paintbrushes.) Paint brushes allow you to have really clean lines and a beautiful finished look. It’s also a great way to add contrast. I traced the waves with the blue Sharpie Medium Point and the sun with the red Sharpie Medium Point. Mark the contour with a paintbrush for a clean, finished look.

Design Variations

If you don’t feel comfortable drawing your design directly onto the surface, you can use transfer paper instead. Place the transfer paper face down on the cooler and secure with tape. Paste your drawing or image onto the transfer paper. Trace your design with a pencil. Lift up the transfer paper to ensure that your design is being transferred to the surface. Color in your design and mark it off with paintbrushes (I used a black Deco Color smooth line).Transfer your image to the surface, draw each part and sketch with paintbrush. Painting a beach scene can be simple and all you need is a few paint colors. First, let’s draw the details. Then paint your background. To paint the ocean, dip your brush in two different shades of blue (one on each side) and draw wide, arcing strokes, making sure to paint layer by layer as you continue. Paint in small portions, allowing each layer to dry so as not to over mix. The same technique can be used to paint the sand, but two shades of yellow instead. Use a small sponge brush to add clouds to the sky.Use two colors on the same brush to create a blended look for sand or ocean. Use a sponge brush to create clouds, to add splashes use an old, dry brush dipped in white paint and dry brush over the part where the ocean color meets the sand. To add depth to the ocean, paint a mixture of two lighter colors on a darker blue background. Draw details and contours with paintbrushes. Read more: how to put vinegar in a hot water heater Rv Draw in the design, draw in the background, add details to the background, draw the design, and sketch with a paintbrush.You can also add drawings or words to a pre-drawn background. Wait for the background to dry completely, then cut out the words or images you want to use. Place them on top of your background to get an idea of ​​where they’re going. Then place the transfer paper face down under each word or design. Mark the outline with a pencil.For a simple background, add an image or word on top with transfer paper. This is especially useful for words, as it’s much easier to “draw” a word in a particular font and then draw it than to handwrite it with a brush. Use the paintbrush to mark and fill in the words. Paint pens also give you more control than brushes. Highlight and fill in drawn words with paintbrush to create brush characters.

More Decoupage

You can also add interesting designs and images using decorative paper or patterned tissue. Cut out the design or image you want to use, and with a foam brush, add a generous amount of Mod Podge to the surface of the cooler. Quickly glue your decoupage on top of the pasted surface and add Mod Podge on top of the paper. Smooth out any air bubbles with a brush or your fingers just make sure there’s a little Mod Podge to smooth around, otherwise you could tear the paper if it dries too quickly. Wait a few minutes and observe if any air bubbles form. If so, just dip your finger in the Mod Podge and flatten the bubbles. Let dry. Mark around the entire edge with a white DecoColor paintbrush.Cut patterned tissue paper and paste with Mod Podge. Sketch with paint pen when dry.

Step 4: Seal in your design

When all paint on all sides is dry, apply a thin layer of Mod Podge Outdoor over the entire cooler. Let dry for 15-20 minutes then add more light layers (dry in between). Allow 72 hours after final coat to dry before using outdoors. You may need to reapply every few months for continued protection.I hope you enjoyed this tutorial on how to draw a cooler and that you were inspired to create one of your own! Read more: How to prolong reddit usage time

Last, Wallx.net sent you details about the topic “How To Paint A Cooler❤️️”.Hope with useful information that the article “How To Paint A Cooler” It will help readers to be more interested in “How To Paint A Cooler [ ❤️️❤️️ ]”.

Posts “How To Paint A Cooler” posted by on 2021-11-15 15:23:14. Thank you for reading the article at wallx.net