How To Put An Aux Cord In Your Car

The Aux input has become a key feature of modern car stereos. However, factory-installed stereo systems on older vehicles are not available and, therefore, you cannot play playlists on mobile phones or mp3 players on those systems.If you don’t want to get rid of your classic stereo system, but also want to play hundreds of tracks from your mobile device on your car speakers without burning a CD, you need to know how to install the aux cord in your car. car stereo system. How to fit an aux cord into your car Below we’ll show you how to add an auxiliary input to your car’s stereo without going to an audio store.

What you will need to follow this guide

• RCA-aux . adapter/cable
• Aux input jack
• soldering iron
• Welding wire
• Drill

Depending on the stereo system installed in your car, you have two options for installing the aux input.

• Using RCA-aux . cable/adapter
• Install all aux input jacks

Using RCA-aux . cable/adapter

Read more: how to make a drawstring bag with a round bottom If your stereo has an RCA input (check its back), it should be pretty straightforward to install the aux input. All you need is a ready-made adapter cable. Plug its two RCA input jacks into the stereo and use the 3.5mm pin as your aux input. However, if there is no RCA input in the stereo, the installation process becomes a bit cumbersome. a little complicated. Now you have to solder an aux input jack to the stereo system. Let’s take a look at the steps you’ll need to follow.

Install all aux input jacks

Identify Stereo CD Changer Pinout

After removing the stereo from the dash, you have to locate the CD changer and its pinout. Here, a little research is needed. You must refer to the manual of your car stereo. You can also run searches online to find the exact layout and pin placement on the CD changer used in your stereo system. Your goal is to identify the ground, left and right channel pins on the pinout.

Solder the Aux input jack

The standard aux input jack has a 3.5mm male jack on one end and three different colored wires on the other end. You must solder those three wires to the three pins of the CD changer after identifying them in the previous step. The black wire will be soldered to the signal ground pin, the red wire will be soldered to the right channel, and the white or yellow wire will be soldered to the left channel.Read more: how to get the sap from the box | Top Q&A If you’re using a soldering iron for the first time, prepare some warm-ups and practice in advance. Take a simple plastic board, mark small dots on it with a pen/marker, and use solder wire to thread the dots through the solder. Once you have the correct dot, proceed to solder the aux wire to the jack of the CD changer.

Mount Jack on Dash

After successfully attaching the wires to the CD changer plug, you must fix the male jack of the aux input on the dash in such a way that you can easily use it to plug in your devices. You may have to drill a slot in the dash to fit the jack. Choose the drilling location carefully and make sure that there is nothing behind the position you are going to drill.

Test

Before putting the head unit back and reinstalling the dash, you should check the aux input. If the stereo system starts playing audio input from your phone/mp3 player, insert the input unit into its docking bay and pack the dash components. If not, troubleshoot and get help from a car audio professional.

Inference

We hope that this “how to set up the aux input in car stereo guide” will help you expand the functionality of your old car stereo. If you liked this article, don’t forget to share it with car owners who are driving classic cars with antique frames. If you have any questions, feel free to drop them in our comments section. Last Updated October 20, 2021 / Unit Link / * Image Disclaimer: We only use images / data from the Amazon Product Advertising API on products affiliated with Amazon. On products with a “Price at Crutchfield” button, we use images/data from topqa.info under a partnership agreement. Read more: how to create a master list on tumblr | Top Q&A

Last, Wallx.net sent you details about the topic “How To Put An Aux Cord In Your Car❤️️”.Hope with useful information that the article “How To Put An Aux Cord In Your Car” It will help readers to be more interested in “How To Put An Aux Cord In Your Car [ ❤️️❤️️ ]”.

Posts “How To Put An Aux Cord In Your Car” posted by on 2021-10-30 23:51:30. Thank you for reading the article at wallx.net