How To Remove Etching From Glass Shower Door

Video How to Remove Marks from Glass Bathroom Doors Do you try to get rid of hard water stains and stubborn stains on the bathtub or shower door, no matter what you try? You’re not alone, I’ve heard countless readers say they’ve tried everything from my magic soap scum remover to cleaning vinegar, hydrogen peroxide, oven cleaner, muriatic acid, steel wool , Bar Keepers Friend, Bon Ami and others expensive chemicals to remove horrible, ugly hard water stains and white fog.

Serious situation

Contents

Although most of the time Magic Soap Scum Cleaner deals with the problem, but even if it cannot handle the serious situation where the minerals in the hard water have been soaked too much, the surface of the glass has become etched. forever.

Many failures

Some readers reported that it took multiple cleanings with the magic item to get their windows really clean, while others said they’ve tried everything from magic materials to white vinegar. 30%, hydrogen peroxide, oven cleaner, muriatic acid, steel wool, Friend of the Bar Keepers, Bon Ami, and even a razor blade to remove the problem—all to no avail. I have to admit this got me in a predicament and advising new doors was the only solution.

Magic solution

Then I discovered the solution: Sandpaper Read more: how to fix a leaking aquarium that won’t drain Yes, you read that right but haven’t stopped reading. This is no ordinary sandpaper. I am talking about a quality automotive waterproof wet/dry sandpaper with such fineness, it is used in the automotive industry for mirror polishing of car surfaces. You can use the same sandpaper to sand the mineral build-up on your bathroom door and return it to its original clear, clean, sparkling look. Your choice, You want automotive quality wet/dry sandpaper. The best product I’ve found for this job is the Premium Wet/Dry Waterproofing Sheet. This is a 12-sheet sandpaper ranging from #1500 to #7000 grit. The grain on this sandpaper is so fine that it won’t scratch the glass, the same way a woodworker’s sandpaper, steel wool or other abrasive products can.

Start with #3000

For severe watermark stains, start with a piece of #3000 sandpaper (cut to a size you’re comfortable holding in your hand when you’re sanding the glass). provide lubricant. Do not try to make this dry completely. Using a circular motion, scrub the entire surface of the glass. You will immediately start cutting out those stubborn deposits. Prepare to be surprised.Everyday Cheapskate participates in the Amazon Services LLC Affiliate Program, an affiliate advertising program designed to provide a means for us to earn money by linking to affiliated websites Amazon link.

Move up to #5000

Read more: how to import avi file into davinci ResolutionNext, move up to #5000. Repeat above to make sure sandpaper and glass are wet.

Finished with #7000

Repeat the move to #7000 as needed to remove even the smallest scratches that may remain. At this point you’ll be polishing the surface to a mirror-like finish, with a paper-like feel — that’s good #7000 Depending on the severity of the problem, the whole process could take from five minutes to longer to finally achieve the level of success you desire. But know it will work. Your shower door will look like new — without smoke or expensive chemicals.

Maintenance

To keep your glass shower door looking great, buy a cheap bathroom squeegee or use a microfiber cloth to wipe down the shower surfaces (walls and doors) to remove all standing water. each use. First Published: 9-27-18; Update & Republish 2-3-20