How To Secure A Safe Without Drilling

The easiest and best way to keep yours safe is to fasten it to the floor. However, this method may not be the best choice for everyone, especially for those who are just renting an apartment or a house. permanent damage to their property. Read: how to secure a safe without drillingHow to secure a safe without bolting to the floor And if you move around a lot, it can be a bit complicated to fasten the safe to the floor, unscrew it, and then bolt it to the floor of your new apartment. fix this? Read this article to discover the most effective ways on how to stay secure without screwing to the floor.

Different ways of securing safes without bolting to the floor

Contents

You will be surprised by the number of alternatives you have. After all, the goal here is simply to reduce the portability of your home safe, so thieves will have a hard time taking it with them.

Technique 1: Shade the safe on the steel plate.

One option you might consider is bolting the safe to a large pallet or steel. This way, it will be too heavy or large for the thief to carry it outside of your home. This is quite simple and anyone can do it.– ¼ inch thick piece of steel Steel must be thick to make your safe heavier. Otherwise, it should be wider than your door frame so thieves have to turn the safe to the side so it can fit in the door.– Drill– Correct size of screw

5 best cordless hammer drills

Step 1: Prepare the safe and the steel plate, place the steel plate on the position you intend to place the safe. After that, install the safe on it.Step 2: Screw on the steel plate After locating the safe and the steel plate, find the bolt hole in the bottom part of the safe and then drill a hole into the steel plate to coincide with the location of the safe. those bolt holes. After making the holes, you proceed to screw the safe into the steel.

Technique #2: Add weight to it.

This is the easiest and most cost-effective way to secure your safe without screwing it to the floor. Read more: how to be a detective in bitlife What you will need: – Weight Drill If you don’t have weights, you can use anything in your home that weighs 50 pounds or more. Step 1: Place the safe in the desired location. You won’t easily spot it. Step 2: Put heavy items inside the safe. This way, the safe will be too heavy for thieves to lift and break open easily.

Technique 3: Hide it under the floorboards.

Just because you can’t drill holes in the floor doesn’t mean you still can’t make the most of your floor, however, this technique only applies to laminate flooring. This technique allows you to hide the safe and at the same time save space in your home. Be aware that this technique will have some disadvantages. Firstly, this option will not give you easy access to your safe, additionally, there is a chance that you damage the floorboard or it may not return to the way it was installed. To prevent this, you may want to hire a professional to do the job for you. will use this to pry out the parquet board.– Grinder Weight If your floorboards are too long, you can use this to lay the floors so that they can be easily supported. Step 1: Raise the floorboards. space under them. Lay out as much flooring as you can to match the size of your safe. For how to raise floorboards, see This videoRead more: How to restore a Floyd rose | FAQ AND STEP 2: Make sure that there is enough space under the floorboards for your safe.Usually, there are pipes and structures under the flooring. Check to see if it has. If you don’t have one, you can proceed to place the safe under the floorboards Step 3: Put the floorboards back Once the safe is in place, you can arrange the floorboards on top of it. You don’t have to seal the floorboards to be able to access your safe whenever you need it.

Technique 4: Glue the safe to the floor.

If you’re looking for a simple way to secure your safe to the floor without screws, this is the option you might want to make. commonly used for constructions that use wood, glass, ceramics or metal.Find an ideal area to put your safe. Take the safe to that area then use tape to track the size of the safe. Step 2: Stick the safe to the floor Once you’ve got the dimensions of the safe, use the partial trace as a guide for where you should put the glue. Apply the glue in dots all over the surface of the marked floor, you can use a scraper to spread the glue evenly. Make sure not to put too much glue as a little glue can go a long way.

Summary

Many people fasten their safes to the floors of their homes with the aim of making your safes difficult to carry, but when you do this, thieves won’t bother stealing as it would take too much time and effort. their strength. If you are not allowed to fasten the safe to the floor, you can find a variety of methods above how to stay secure without screwing to the floor. These methods range from simple to complex, but if there is one thing they all have in common it is the fact that they are all effective in securing your safe at home.But in addition to keeping the safe safe, you also need to make sure that it is very difficult for thieves to open the safe and get inside. You can do this by using a hard to guess code or by investing in a safe. with advanced biometric system.