how to install a pot filler

Video Tutorial on how to install potting filler Installing potting filler to an existing wall is not a difficult task. However, a pot filler still above the stove will help a lot. If you choose one for you, you don’t have to carry water from the sink to the stove. It also helps to pour all kinds of pots. Boil water, make tea, it’s easy with an extra pot. Single Valve Gasket Faucet is very easy to install, now, if you want to install the pot spout on your kitchen wall, you need to follow a few steps. In this guide, we will discuss those steps.Step 1: The first move is to make a plan. You can find a lot of video tutorials on the internet, they can show you the steps, but when you do it yourself. You have to make a plan for yourself. Write down your plan if needed.Step 2: Bring your water line to the location where you want to install the faucet. Get down and find your water supply line. This is a plumbing repair process. So, if you are shy, get the help of professional plumbing services. But if you choose to do that, then you must use a hose or a hose. Read more: how to put sd card in galaxy s7Bring the water line to the wall. Drill a hole where your potting filler will come out. You can choose to place it in the center of the kitchen or on the side. Up to you.Step 3: Attach a threaded hose to your hose or plumbing. The maximum size of this tube is 2 and a half inches. When mounting, use glue to make sure there aren’t any leaks.Step 4: Install the mounting plate. Take the mounting plate and mark where you need to install the screws. Drill holes according to the screw measurements, then place the mounting plate with the spacer and tighten the screws. Read more: how to unlock stolen iphone passcode without a computerStep 5: Now, set up the pot subsection. Attach it to the threaded pipe you installed. To keep your thread leak-proof and durable, use glue. Do not tighten the pot attachment. This will damage the thread. Use your common sense and secure the end position of the thread. No added pressure. It will damage the thread and this will cause leaks and drips.Step 6: Build your drywall and make everything look good when you’re done with everything. Enjoy your pot side.Note: