How To Remove Side By Side Refrigerator Doors

One of the problems with refrigerators is that the door handles almost always stick out. The reason for this design is for you to easily grab the handle and open the two doors. However, this design makes it difficult for some models of refrigerators to squeeze through tight spaces such as doors. To know how to fix a sagging refrigerator door, continue reading our article. It has the instructions you need to know to make this work properly.

There is some preparatory work to be completed

Contents

As you remove the doors, there are a few things you need to do before you start taking those doors off their hinges. The first step of this process is to get all the food inside the refrigerator and freezer, and place the food in a cooler or two to make sure nothing goes bad as you work. The second step of preparation will be recruiting someone to help you. It could be a big enough family member or a friend. Your spouse can also help you. Doors can be quite heavy so doing it yourself is out of the question.

Remove the doors

Instructions for removing the refrigerator door vary between models. So make sure to check your owner’s manual to see if there is one that will help you. Keep in mind that refrigerator door removal instructions vary by model, and the owner’s manual will help you find the right instructions for the refrigerator you actually own.

Bottom freezer

Left doorStep 1 – Unplug the refrigerator and move it away from the wall or out of its corner. This will give you the necessary safety as well as the room you need to work.Step 2 – Disconnect the water supply from the left door. There is a release ring you need to pull and once done, the water line should come out pretty easily. Read more: How to install phoenix on fire stickStep 3 – Open the left door and remove the top hinge cover after removing the securing screw. Then, remove the hose and disconnect the harness. Don’t forget to remove the ground screw.Step 4 – Turn the hinge lever counterclockwise and then lift the top hinge off the hinge lever pin. Have someone hold the door while you do this step.Step 5 – Lift the door off the middle hinge pin and remove the door. Place the door out of the way in a safe place so it won’t fall and get damaged.Step 1 – Open the right door and remove the right hinge cover. You will first have to remove the screw that holds the cover in place. It lifts off easily enough and only takes a second to do.Step 2 – Turn the hinge lever clockwise and then lift the top hinge off the hinge pin. Again support the door so it doesn’t fall as you work.Step 3 – Once all of this is done, simply remove the door from the center hinge and place it next to the left door or in another safe location.

Side by Side Fridge Freezer

Right doorStep 1 – Unplug the refrigerator so you can work with peace of mind. Place any food inside the refrigerator in the freezer for protection. Then, remove the grill at the bottom of the appliance. Your owner’s manual will have instructions on how to do it correctly.Step 2 – Move the refrigerator away from the wall and open the door on the right. Use a Phillips screwdriver to remove the hinge cover and then use a flathead screwdriver to pry the hooks that hold the cover in place. Remove the cover. Read more: How not to wrinkle RayonStep 3 – Disconnect the harness and remove the ground screw.Step 4 – Turn the hinge lever clockwise and pull the hinge away from the latch. Then lift the door to remove it from the bottom hinge. Place the door in a safe location.Step 1 – Press the metal neck at the top of the water pipe to pull the water line out.Step 2 – Open the door and unscrew the hinge cover and use a flathead screwdriver using the same screwdriver to lift the hooks. Remove the cover. Read more: How not to wrinkle RayonStep 3 – Disconnect the harness and remove the ground screw.Step 4 – Turn the hinge lever counterclockwise and then lift the top hinge off the latch.Step 5 – Pull the door off the bottom hinge by lifting and carefully removing the water line through the bottom hinge.

Last few words

As you can see, this task is not too difficult, as long as you have an extra hand to help you. It’s important to make sure anything you remove is placed in a safe place. Also, be aware of water lines as they can be damaged quite easily if handled incorrectly. Read more: how to clean a smoke detector with compressed air