How To Acid Wash A Shirt
But Becca, I think this is a blog about writing and books and malarky, not DIY projects. Why are you posting about a full return to the pre-80s season? I don’t know, because I can? In fact, here’s the basic story: I got bleach on one of my favorite shirts. Honey. So, I looked on the internet about how to make my own t-shirt washing acid, and I found that there were a lot of conflicting instructions. Use pure bleach, not pure bleach. Wet the t-shirt first, don’t wet the shirt first. Read: how to wash shirts with acid So I decided to do a little experiment to see which method worked best before I recklessly poured bleach on my Forever 21 crop top rack. .And then share my knowledge with all of you! If you choose to purchase using my Amazon links, I will receive a small commission at no extra cost to you.
tools
Contents
Regardless of which instructions you follow, you’ll most likely need roughly the same supplies, as follows:
- old t-shirts (I have some excess that I don’t care about, so I chose four different colors for easy identification, though I guess if you don’t want to sacrifice any of your own t-shirts , you can always buy a simple number to mess with)
- bleach
- country
- a spray bottle or two (I could only find one so I reused it)
- a bowl or bucket that you don’t care about (for washing after bleaching)
- elastic
- Safety glasses
- rubber gloves
- the surface you don’t care about (or the surface covered with newspaper or something, but better on the outside)
safety first!
method
I decided to test the four main methods I came across while searching the Internet. While there are certainly more variations, if I tried to test every variation, I would probably go crazy. so the four methods (and their respective t-shirts) are as follows:
- blue t-shirt: flattened, sprayed with pure bleach
- purple t-shirt: flattened, sprayed with bleach solution 50/50
- teal blue t-shirt: tied with an elastic band (tie dye style), sprayed with pure bleach
- black t-shirt: tied with an elastic band, sprayed with bleach solution 50/50

result
simple method
Read more: how to make 808 hard fl studio hits So for the ones I just sprayed with willy-nilly bleach, here’s how they came out:
tie dye method
The flat method isn’t a bad one and you have more control over where the bleach goes, but I definitely prefer the tie dye method. And here’s why:
so who wins?
Based on my results, this is what I would do for a regular cotton t-shirt:
Here’s what I did on the bleach-stained shirt that inspired this project – because it’s a light color and the fabric is thin, I used diluted bleach, which is a good name. The rest I did the same and this is the end result:
Last, Wallx.net sent you details about the topic “How To Acid Wash A Shirt❤️️”.Hope with useful information that the article “How To Acid Wash A Shirt” It will help readers to be more interested in “How To Acid Wash A Shirt [ ❤️️❤️️ ]”.
Posts “How To Acid Wash A Shirt” posted by on 2021-10-27 08:05:05. Thank you for reading the article at wallx.net





