DIY Ribbon Memo Board

Ribbon memo boards are a beautiful decorative way to display photos, notes, lists, etc. While these aren’t hard to find in stores, finding one in the color you want AND the size you need can be a challenge. To get exactly what you want, why not get it?! Here’s an easy tutorial for making your own ribbon memo board. Posts may contain affiliate links *Read: how-to ribbon bảng

DIY ribbon memo board

Contents

As part of my daughter’s bedroom makeover, I had an area of ​​nearly 4′ x 5 that I wanted to fill and decided that a custom, DIY ribbon memo board was the display solution. perfect! but the exact same steps apply no matter which size you choose.

Munition

  • Plywood {I cut it to size at the store}
  • Glue spray
  • Batting
  • Cloth
  • Ribbon
  • Tacks {I used Decorative Nails from the upholstery section of a fabric store}
  • Pin gun
  • Plastic mirror holder

Step 1: Cut Batting to size

Simply place {or open} the polishing stick onto the plywood and cut for an exact fit. For me, I feel two coats of polish are necessary and so duplicate it on its own, but depending on the polish you use, a single coat may be enough.

Step 2: Comply

Read more: Import used cars directly from Japan | Top Q & AT This step is optional, but especially for an oversized board, lightly spraying the plywood with adhesive and fixing the polish just helps ensure that the board stays in place. in the next step. It also allows you to move and/or flip the board without worrying about whether the shot will miss, so I highly recommend this step.

See Also  Fictional characters who are leaders

Step 3: Attach the fabric

You can use any fabric of your choice, but ideally, it should be one that isn’t too transparent so you can’t see the shadows and/or board. Also, be sure to iron BEFORE you attach! Cut your fabric about 1 1/2″ – 2″ larger than the board on all sides for more material to work with. Center your board and buff the ball on the WRONG side of the canvas {if any} so the right side is facing out. Then, using your staple gun, start pinning to one side of the board, working from the center out towards the corners {this way you can stretch any lumps}. After completing one side, pin the other side, making sure to pull the fabric tightly. Then finish the other two sides, to get sharp corners fold the fabric into a triangle then fold and pin – like wrapping a pack!

Step 4: Measure

You can add as many ribbons of any thickness as you want, as long as you specify the measurements in advance. Well, it’s time for a little math! First, you’ll need to decide how many ribbons you want on any given side of your board. Personally, I like the look of the memo board with bands across the corners, so I included the corners as one of my measurements. On my board, I decided that I wanted FOUR ribbons, including those in the corners. To determine the equal distance, I divided the length of each side by 3 and lightly marked the third with a pencil on the back of the board. Remember, since we’re including the corners, dividing the length by 3 yields 4 ribbons. Similarly, dividing by 4 gives 5 ribbons, and so on and so forth.

See Also  Sölden, Austria: The Ultimate Ski Resort Guide

Step 5: Attach the ribbons

Read more: how to screw the back of a tank top This step is pretty simple, as you just need to pin the ribbons to the board. The only tip is to remember that your pencil marks from Step 4 represent the CENTER of the ribbon! This way your ribbons will be evenly spaced AND it doesn’t matter what width of ribbon you have chosen for your project. So when you attach the ribbon to the back of the board, make sure your pencil mark aligns with the center of the ribbon.

Step 6: Add Nails

Secure the ribbons in an overlapping position using decorative nails or pins. I covered each one of them with a cloth and smashed them down with a rubber mallet.

Step 7: Hanging

For smaller memo boards, you can use a Command hook or even a velcro strip. In my case, the board is heavy but thin, so the standard picture frame hooks won’t stay in the board and hold the weight. I used a mirror clip instead! The benefit of mirror clamps for a large project like this is that by fixing the edges, you can flatten the board and smooth out any curvature or curvature that the plywood may have. My daughter has started showcasing her fashion designs on her homemade ribbon memo board. ????Want to save this for the future? Make sure to PIN it!Want to see more of my daughter’s room? You may like this post: Read More: How to Pass the Well Water Test

Last, Wallx.net sent you details about the topic “DIY Ribbon Memo Board❤️️”.Hope with useful information that the article “DIY Ribbon Memo Board” It will help readers to be more interested in “DIY Ribbon Memo Board [ ❤️️❤️️ ]”.

See Also  I don't know who needs to hear this

Posts “DIY Ribbon Memo Board” posted by on 2021-10-28 22:05:14. Thank you for reading the article at wallx.net

Rate this post
Check Also
Close
Back to top button